Manufacture of vessels, stabilization devices and pipeline support.

In order to expand the range of manufactured production in 2011 the manufacture of tanks and vessels that work under the pressure, stabilization devices and pipeline support  is founded at our plant. These items are widely used in construction of pipeline-gas lines, compressor stations, stations of gas treatment and other objects of transportation and oil-gas production. To organize the delivery of these goods to the construction object of JSC “Gazprom” TU 1469-010-15188736-2011, TU 1468- 012-15188736-2011 are developed. Permissions for using this equipment were issued by the Federal Agency for ecological, technological, nuclear oversight. In accordance with the decision of the Department of Gas Transportation Underground Storage and Utilization JSC “Gazprom” and under the contract with LLC “Gazprom VNIIGAS” there were works on examination of relevant technical conditions and best pieces. The results showed that these products comply with the current norm-technical references and can be applied for the building construction and reconstruction of the  objects of JSC “Gazprom”.

Range of manufactured substandard equipment is counted more than 100 items including:

  • Horizontal tanks with the volume of 0.5 till 100 m³ of above ground installation with the flat bottoms,  working under the pressure  no more than 0,04 MPa (0,4 kgf/sm²);
  • Horizontal tanks with the volume of 0.5 till 100 m³ of above ground and subsurface installation with the  conic unbeaded bottom s working under the pressure no more than 0,07 Mpa (0,7kgf/sm²);
  • Tanks of water emergency reserves with the volume from 5 till 100m³;
  • Two-walled tanks with the volume from 5 till 25m³;
  • Vertical storage vessels with the volume from 1 to 25 m³ of above ground installation with the elliptic bottom, working under the pressure no more than 16 Mpa (160 kgf/ sm²);
  • Horizontal storage vessels with the volume from 0,5 to 10m³ working under the pressure no more 16 Mpa ( 160 kgf/sm);
  • Chambers for odorant transportation with the volume from 0,5 to 5 m³;
  • Pressure chambers, air drum with the volume of 0,5 to 50 m³, working under the pressure no more than 16 Mpa ( 160 kgf/ sm²);
  • Metal structures (light poles, mast of network connections, racks of different directions);
  • Stabilization devices.

Balance disk seat
Type A

Fixed holder
Type A

Crow holder
Type A1, B1

Channel weld support
Type A, B

Pipe saddle

Self- center settled holder
Type A

Type B

Type C